Latest Utile News

  • Utile Gas Boosters

    Contracted by Ener-G once again, Utile have supplied 8No. natural gas booster packages to supply elevated gas pressure to feed their CHP engines installed on an 18 MWatt gas fired STOR and Peak Power lopping power station. Using their Utile 90 series multistage, centrifugal gas boosters, Natural Gas at a flow rate of 500Sm3/hr was […]


  • Southport STW

    Contracted by Eric Wright Water we recently supplied and installed a Sattler 3200m3 Model B9 125/250 double membrane gas holder for United Utilities. This incorporates duty/standby Zone 1 air blowers with flow control, over pressure valve, gas detection and laser level control. All equipment is supplied in accordance with WIMES 4.01 for coastal location. The […]


  • Bran Sands STW

    In May 2018 we supplied and installed the first Sattler 1190m3 Model B9 118/250 double membrane gas holder to replace the Kirk Biodome GS218. At the same time we also upgraded the gas suction and delivery lines to provide “double isolation” and purge points, to allow safe maintenance of the system. Utile have recently completed […]


  • Bran Sands STW

    Contracted by Northumbrian Water direct, Utile have been chosen to replace the 2No. Kirk Biodome GS218 gas holders with Sattler 1190m3 Model B9 118/250. These are equipped with the Sattler patented inner membrane stabilisation and air distribution systems. The original gas holders were only installed in 2009 and our internal inspections found the Biodome Type […]


  • New Machining Centre

    Utile Engineering take delivery of a new Doosan H8000, twin 800mm pallet horizontal machining centre. This will be commissioned and into production by mid-May, complimenting their already impressive CNC machine shop production facility. The addition of this machine enhances their reputation as the leading UK manufacturer of high quality Vacuum Pumps, Gas Boosters, Gas Mixing […]


  • Gas Holder Inspections & Service

    Utile are pleased to promote their ability to Inspect, maintain, repair or renew your membrane gas holders. Whether you have a floor mounted double membrane, or a roof mounted “dome” with double membrane for gas storage or a single membrane for odour control, there is an essential requirement for on-going inspection, maintenance, service and renewal […]


  • Beer Sheva STW – Anaerobic Gas Mixing

    As part of an “Own and Operate” contract for Minrav Infrastructure Ltd, Utile have been selected to supply 3No. new L175HP oil lubricated, sliding vane gas mixing compressor packages to the Beer Sheva STW, to feed their existing digester gas mixing systems. They replace Italian, Mapro compressors that were removed from site. The site is […]


  • Burnley STW

    As part of United Utilities Water plc, AMP5 Capital Delivery, Utile were selected to partner KMI Plus, (a joint venture between Keir, J Murphy, Interserve and Mouchel) to deliver the Biogas boosters for gas transportation to the new Waste Gas Burner, forming part of the Burnley Sludge THP Project. The scope of works was to […]


  • Maple Lodge STW

    As part of Thames Water Utilities Ltd, AMP6 Capital Delivery, Utile were selected to partner Atkins to deliver the Biogas boosters for gas transportation to the Boiler and CHP plant forming part of the Maple Lodge STW CHP upgrade. The scope of works was to design, build, deliver, install, test and commission a duty/assist and […]


  • US Embassy – London

    Contracted by Wolseley UK Ltd once again, Utile designed and built a duty/standby natural gas booster package to supply elevated gas pressure to feed the Kitchen equipment, Hot Water Boilers and CHP plant recently installed at the New US Embassy building in London. Using their Utile 90 series multistage, centrifugal gas boosters, Natural Gas at […]